Innovatek Peltier Contact Gel 2x5ml (2k - syringes)

WÄM Innovatek Peltier Kontakt Gel 2x5ml (2k - Spritzen) EOL

Article no: 1022715
Manufacturer no: 501682
EAN: 4250168528151
Weight: 0,053 kg
Verfügbar: There are more than 5 units available

231 Visitors show interest

11 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€21.18 *

(€2,118.00 * / 1000 Milliliter)

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

WÄM Innovatek Peltier Contact Gel 2x5ml (2k - syringes) EOL

€21.18 €0.00 Prices incl. VAT plus shipping costs

The innovatek Peltier contact gel with silver filling is the optimal connection between Peltier... more

Close menu

Product information

The innovatek Peltier contact gel with silver filling is the optimal connection between Peltier element and heat exchanger - for example a water cooler - in order to transport the waste heat to the cooler as efficiently as possible. The Peltier contact gel is used - in contrast to the paste - for the removable connection of Peltier elements to the heat exchanger or heat sink. With 2x 5 ml, the contact gel is extremely economical and can be used for several applications (depending on the size and gap of the contact surface).

Thanks to the silver filling, this Peltier contact gel offers significantly higher thermal conductivity.

After mixing (1:1) the two components included in the delivery, the contact gel remains viscous, which means that the heat exchanger can be removed from the Peltier element by hand. Please then follow the steps below when using the mixed Peltier contact gel:

Important:

Clean the contact surfaces to ensure they are free of dirt and grease.
Apply a small amount of contact gel to the center of the component to be cooled.
Press the cooler firmly onto the Peltier element.
Remove the cooler again and check whether the entire contact surface has been wetted.
If necessary, apply a little more contact gel, press the cooler back on and fasten it.
Repeat the process for the other side of the Peltier element.

Note: Please note that conventional contact agents (eg thermal pastes such as Arctic Silver 5) are not suitable for use with Peltier elements, as these usually consist of a carrier substance and fillers. When used with Peltier cooling, the carrier substance migrates out of the contact zone via capillary effects and cooling and heating cycles, and the dry filler would remain between the Peltier element and the heat exchanger. This would mean that the waste heat could no longer be dissipated via the heat exchanger and the Peltier element could potentially be destroyed.

Technical data:

Type: Peltier connection
Content: 2x 5 ml
Form: Pasty
Viscosity: approx. 1000 mPa*s (at 23 °C)
Density: approx. 4.00 g/cm³ (at 20 °C)
Color gray
Odor: odorless
Flash point: > 200 °C
Ignition temperature: > 450 °C
Thermal conductivity coefficient: 6.0 W/mK
Electrically conductive: No

Further links

Close menu

Jetzt nützliche Details ansehen... more

Close menu

Produktdetails

Questions & answers... more

Questions & answers

No questions have been asked so far.

Do you have a question?

Read, write and discuss reviews... more

Close menu

Customer evaluation for "WÄM Innovatek Peltier Contact Gel 2x5ml (2k - syringes) EOL"

Write an evaluation

Evaluations will be activated after verification.

Innovatek Peltier Contact Gel 2x5ml (2k - syringes)

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return